Designer:
RafaHiFi
Project Category:
Loudspeakers/Cabinets
Project Level:
Beginner
Project Time:
20+ Hours
Project Cost:
$100 – $500
Project Description:
Two way full range speakers. Suitable for both music and home theater
Design Goals:
Medium sized, reduced costs, two way, simple design and construction
Driver Selection:
Woofer: Dayton Audio RS 225P-8A (#295-577)
Tweeter: Dayton Audio RST28F-4 (#275-141)
Enclosure Design:
Bass-reflex 35 liter
Enclosure Assembly:
18 mm MDF for the box and 30 mm solid wood (Eucaliptus Grandis) for the baffle
Crossover Design:
3rd order High pass, 2nd order low pass, crossed at 2.5 kHz
Conclusion:
I was surprised by the sound quality and balanced response. At the beggining of the project I had doubts about the cross-over (2nd and 3rd order, phase and so on) but again, pleased with the results
About the Designer:
Engineer in electronics, Post graduate studies in architectural acoustics. Audio and speaker design enthusiast. I live in Gualeguaychú, Argentina.
Project Parts List: