Designer:
Blackhawk111
Project Category:
Subwoofers
Project Level:
Beginner
Project Time:
1-8 Hours
Project Cost:
$100 – $500
Project Description:
Replacing the amplifier in a Polk PSW110. This will be the 2nd time this amp board has failed, the original and replacement. Seems they only last 18 months. In my case, one of the caps is swollen and the unit just hums. This is a nice size subwoofer, good quality cabinet, good speaker and unfortunately poor quality electronics. I reviewed direct replacement options but the current prices are too high and availability short. I decided to find a replacement and knew Dayton had options. I chose to upgrade in power and capability. To ease in mounting, I also ordered the mounting frame..
Design Goals:
Repair and improvement in performance of a Polk Subwoofer.
Tips & Tricks:
The mounting frame solves several issues with the original opening size. I chose to use some thin MDF to make a cover for the original opening and just cut a simple slot for the speaker leads. I had the leads come out of the top to avoid proximity to the power supply portion of the new amp. I used flat head wood screws and sunk them deep into the MDF to keep the new mounting area relatively flat. `
Conclusion:
This was a great option for a replacement and upgraded amplifier for this subwoofer. I did use some power tools but this could easily be done with limited tools. The results look great and the sounds is excellent. I wish I had done this on the first time replacing the amp.
Total time spent was about 2 hours.
About the Designer:
I’m a DYI person. I have an electronics background and like to do woodwork.
Project Parts List:
|
Part # |
Description |
Qty |
|
300-8011 |
Dayton Audio SPA-F Subwoofer Plate Amplifier Mounting Frame for SPA250DSP and SPA500DSP |
1 |
|
300-8010 |
Dayton Audio SPA250DSP 250W Subwoofer Plate Amplifier with DSP |
1 |