Designer:
Riyaaz Shamsoodien
Project Category:
Tower Speakers
Project Level:
Advanced
Project Time:
20+ Hours
Project Cost:
Over $1,000
Project Description:
3-way Towers with Dayton Audio drivers and Radiators
Design Goals:
• Audiophile grade / high end audio. As I already have x2 Dayton 12″ subwoofers ported and tuned for 25Hz, I want my towers to support tight and responsive bass.
• Of course, an Aesthetically appealing woody design
Driver Selection:
• X1 Dayton Audio PT2C-8 Planar Tweeter
• X2 Dayton Audio RS125P-4 5″ Reference Paper Woofer 4 Ohm
• X1 Dayton Audio DS215-8 8″ Designer Series Woofer Speaker
• X2 Dayton Audio DS175-PR 6-1/2″ Designer Series Passive Radiator
Enclosure Design:
• African Black Wood CNC’d to size
• 16mm MDF double layered throughout
• Woofer / Radiator volume tuned to about 32Hz @ 25 litre net volume
Enclosure Assembly:
• Nail, glued and clamped
• Sanded to smooth finish
• Rust’oleum 2X clear coat on African Black Wood (5 coats)
• Duram Wood Sealer + Duram Durabak PU Liner Paint on MDF
Crossover Design:
• PF-3FH Speaker Divider 3 Crossover 280W Crossover Point: 550Hz, 4.8KHz
Tips & Tricks:
always oversize your natural woods by 2mm around the perimeter and sand off the excess to smooth flush finish.
Use Parts express drawings to accurately design your cut outs.
Conclusion:
Hours and hours of work but I am really happy with results
About the Designer:
3-way Towers with Dayton Audio drivers and Radiators
Project Parts List:
|
Part # |
Description |
Qty |
|
275-085 |
Dayton Audio PT2C-8 Planar Tweeter |
1 |
|
295-371 |
Dayton Audio RS125P-4 5″ Reference Paper Woofer 4 Ohm |
2 |
|
295-430 |
Dayton Audio DS215-8 8″ Designer Series Woofer Speaker |
1 |
|
295-498 |
Dayton Audio DS175-PR 6-1/2″ Designer Series Passive Radiator |
2 |