Designer:
Tony
Project Category:
Subwoofers
Project Level:
Intermediate
Project Time:
1-8 Hours
Project Cost:
$100 – $500
Project Description:
I bought a subwoofer off this woman. It worked there, but did not work when I got it home. I spent all weekend, I determined it was a bad plate amp.
Design Goals:
The replacement plate amp was smaller than the original one. It fit inside the hole cut out.
Conclusion:
I made an enclosed to bolt the plate amp up to then drilled the frame onto the back of the sub.The plate amp looks like it was originally there.
About the Designer:
I am 42 yr old ,love when a problem exists, I always find a solution!
Project Parts List:
|
Part # |
Description |
Qty |
|
300-802 |
Dayton Audio SA100 100W Subwoofer Plate Amplifier |
1 |